Flow Switch with Explosion Proof or Anti Corrosion function, it will be easy work. but if need a flow switch with both Explosion Proof and Anti Corrosion function, it will be a difficult work.
if a flow switch with Explosion Proof function, the shell of the electronic switch is always a metal material, it is not difficult to design a anti explosion flow switch.
GE-341 flow switch use new structure, could monitor the flow by Bidire...
if a flow switch need corrosion resistant function, most of the material is stainless steel and plastic, but stainless steel will not have a good performance, if the liquid have a strong corrosive capacity, so, plastic will be the best choice, e.g. PTFE Teflon flow switch, as the below.
This flow switch is produced by teflon plastic material with a long pa...
if a flow switch, which need both anti Explosion and anti Corrosion, it will be a difficult work, because a plastic shell could not be designed as Explosion proof shell, it will be easy destroyed....so, how to design a stable flow switch with both explosion proof and anti corrosion function?
The engineer of "A.YITE TECG" have some ideas!!!
we could customized this products as the requirement of client, the wetted part will be plastic, but the electronic part will have a metal shell, sealed by glue, isolate the electronic switch from the gas or air or liquid, it will be a very stable design
This product will have ATEX certificate, it could work for Zone 0, Zone 1, Zone 2. zones 20, 21 and 22
Add: Building 17 &22, No.2928, Chuan Zhou Highway, Shanghai, 201319, China