GE-114 Flow Indicator

GE-114 mechanical flow meter with spring-supported pistons for fluid or gaseous media. The measured value is transferred to a display ring via a magnetic coupling. Because of this separation, the display cannot become dirty. Robust construction in brass or stainless steel. The flow could be any direction.

This flow indicator could replace Honsberg NO-008GM015 NO-010GM015 NO-015GM030 NO-020GM030 NO-025GM060 NOK-008GM015 NOK-010GM015 NOK-015GM030 NOK-020GM030 NOK-025GM060.

Code	Flow range				connection
	Liquid		Gas
	GPM	L/min	GPM	L/min
GM020	0.5-5	2-20	18-180	60-600	NPT1/4” 008 NPT3/8” 010 NPT1/2” 015 NPT3/4” 020
GM025	1-7	3-25	20-200	70-700
GM035	1-10	4-35	25-250	100-1000
GM060	1-16	5-60	35-350	150-1400
GM070	3-20	10-70	52-520	200-2000	NPT3/4” 020 NPT1” 025
GM100	4-28	10-100	80-800	300-3000

Include straight calming section of 5 x DN in inlet and outlet.

If the media are dirty, install a filter (use magnetic filter for ferritic components).

It must be ensured that the values given for voltage, current, and power are not exceeded.

When switch on, a load must be connected in series.

The electrical details apply to ohmic loads. Capacitive, inductive and lamp loads must be operated using a protective circuit.

Remove the transport lock (white plastic screw in acrylic body)

before starting operation.