Selection of Flow Switch in Pharmaceutical Corrosive Liquid

At present, the common pharmaceutical corrosive liquids in the pharmaceutical field include methanol, isopropanol, ethyl acetate and other liquids, sulfuric acid, hydrochloric acid, sodium hydroxide lamp solution. They are all corrosive liquid, a common flow switch will be destroyed quickly with corrosion. So how to select the appropriate flow switch to detect the flow of these corrosive liquids?

When the pharmaceutical factory transports sulfuric acid, hydrochloric acid, hydrofluoric acid and other corrosive media, the pipeline cut-off protection is essential, which requires the selection of appropriate flow switch on the conveying equipment, if not properly selected, it will cause machine idling, which is easy to cause production accidents, resulting in the loss of enterprise property and the harm of personnel safety.

There are various corrosive substances in the waste water discharged from pharmaceutical factories. A flow switch with strong corrosion resistance is also required for the flow monitoring of waste water.

In view of the above situation, we recommend GE-313 series flow switches produced by Hong Kong A.YITE TECH company, including plug-in baffle type flow switches and PVC pipe type flow switches.

Air Flow Switch PTFE Teflon

GE-313 Teflon PTFE Plastic Paddle Flow Switch

This flow switch is produced by teflon plastic material with a long pa...

PVC Flow Switch

PVC inline Flow Switches

GE-313AD Teflon Flow Switch with PVC Tee pipe, low cost, 20mm-150mm combats the p...



Contact: Mr.Robert

Phone: 0086-13166369204

Tel: 400-852-8332


Add: Building 17 &22, No.2928, Chuan Zhou Highway, Shanghai, 201319, China